I have downloaded Microsoft essentials 2012 twice and get error message 0X80040705. I only want the windows live mail program not all the other ones included. I left a check mark in only win live mail. Both times I get this error message and it also has
dotnet 40 after the error code. I have this program on my laptop that is dying and want to put it on this laptop. I'd try to just transfer it from the old laptop but not sure just how to do it or if it can be done.
↧
windows 7 on a Lenovo T430 Microsoft essentials live mail will not install
↧
RunDLL error
Installed Windows 10. Now receive the following:
c:\Users\(User Name)\AppData\LocalLow\gsd362A.tmp
↧
↧
warning kernel-pnp 219 (212)
| EventData |
| DriverNameLength | 128 |
| DriverName | WpdBusEnumRoot\UMB\2&37c186b&0&STORAGE#VOLUME#_??_USBSTOR#DISK&VEN_TOSHIBA&PROD_TRANSMEMORY&REV_PMAP#001D0F0C73BFBA61E3150492&0# |
| Status | 3221226341 |
| FailureNameLength | 14 |
| FailureName | \Driver\WUDFRd |
| Version | 0 |
this is my problem what should i do?
↧
BugCheck 1000007E, {ffffffffc0000005, 0, fffff880033c6928, fffff880033c6180}
I'm getting the following on a VM running latest Windows 7. Not sure how to proceed further on pinpointing the root cause. This is happening more and more on more VMs..... Any other commands I can use to further see the issue?
Microsoft (R) Windows Debugger Version 6.2.9200.20512 AMD64Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\temp\dump\050616-36473-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: SRV*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.23392.amd64fre.win7sp1_ldr.160317-0600
Machine Name:
Kernel base = 0xfffff800`02c58000 PsLoadedModuleList = 0xfffff800`02e9a730
Debug session time: Fri May 6 14:11:52.272 2016 (UTC - 7:00)
System Uptime: 1 days 20:26:57.136
Loading Kernel Symbols
...............................................................
................................................................
..................................................
Loading User Symbols
Loading unloaded module list
..................................................
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 1000007E, {ffffffffc0000005, 0, fffff880033c6928, fffff880033c6180}
Probably caused by : ntkrnlmp.exe ( nt!KiStartSystemThread+16 )
Followup: MachineOwner
---------
1: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)
This is a very common bugcheck. Usually the exception address pinpoints
the driver/function that caused the problem. Always note this address
as well as the link date of the driver/image that contains this address.
Some common problems are exception code 0x80000003. This means a hard
coded breakpoint or assertion was hit, but this system was booted
/NODEBUG. This is not supposed to happen as developers should never have
hardcoded breakpoints in retail code, but ...
If this happens, make sure a debugger gets connected, and the
system is booted /DEBUG. This will let us see why this breakpoint is
happening.
Arguments:
Arg1: ffffffffc0000005, The exception code that was not handled
Arg2: 0000000000000000, The address that the exception occurred at
Arg3: fffff880033c6928, Exception Record Address
Arg4: fffff880033c6180, Context Record Address
Debugging Details:
------------------
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
FAULTING_IP:
+0
00000000`00000000 ?? ???
EXCEPTION_RECORD: fffff880033c6928 -- (.exr 0xfffff880033c6928)
ExceptionAddress: 0000000000000000
ExceptionCode: c0000005 (Access violation)
ExceptionFlags: 00000000
NumberParameters: 2
Parameter[0]: 0000000000000008
Parameter[1]: 0000000000000000
Attempt to execute non-executable address 0000000000000000
CONTEXT: fffff880033c6180 -- (.cxr 0xfffff880033c6180)
rax=0000000000000001 rbx=0000000000000000 rcx=0000000000000002
rdx=0000000000000000 rsi=fffffa80c15bf040 rdi=0000000000000002
rip=0000000000000000 rsp=fffff880033c6b68 rbp=fffff80002e712d8
r8=fffffa80c15077a8 r9=0000000000000000 r10=fffffffffffffffd
r11=0000000000000246 r12=fffff8800ae0a790 r13=0000000000000001
r14=0000000000000000 r15=0000000000000001
iopl=0 nv up ei pl nz na po nc
cs=0010 ss=0000 ds=002b es=002b fs=0053 gs=002b efl=00010206
00000000`00000000 ?? ???
Resetting default scope
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
PROCESS_NAME: System
CURRENT_IRQL: 0
ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
EXCEPTION_PARAMETER1: 0000000000000008
EXCEPTION_PARAMETER2: 0000000000000000
WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff80002f04100
GetUlongFromAddress: unable to read from fffff80002f041c8
0000000000000000 Nonpaged pool
FOLLOWUP_IP:
nt!KiStartSystemThread+16
fffff800`02cb9726 48c7c10e000000 mov rcx,0Eh
FAILED_INSTRUCTION_ADDRESS:
+16
00000000`00000000 ?? ???
BUGCHECK_STR: 0x7E
LAST_CONTROL_TRANSFER: from fffff80002cd1355 to 0000000000000000
STACK_TEXT:
fffff880`033c6b68 fffff800`02cd1355 : fffff800`00000000 fffff800`00000001 fffffa80`c15bf000 fffffa80`c914a688 : 0x0
fffff880`033c6b70 fffff800`02f61476 : 00000000`00000000 fffffa80`c15bf040 00000000`00000080 fffffa80`c1507720 : nt!ExpWorkerThread+0x111
fffff880`033c6c00 fffff800`02cb9726 : fffff880`03177180 fffffa80`c15bf040 fffffa80`c1605040 00000000`00000000 : nt!PspSystemThreadStartup+0x5a
fffff880`033c6c40 00000000`00000000 : fffff880`033c7000 fffff880`033c1000 fffff880`033c68a0 00000000`00000000 : nt!KiStartSystemThread+0x16
SYMBOL_STACK_INDEX: 3
SYMBOL_NAME: nt!KiStartSystemThread+16
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nt
IMAGE_NAME: ntkrnlmp.exe
DEBUG_FLR_IMAGE_TIMESTAMP: 56eb24e6
STACK_COMMAND: .cxr 0xfffff880033c6180 ; kb
FAILURE_BUCKET_ID: X64_0x7E_NULL_IP_nt!KiStartSystemThread+16
BUCKET_ID: X64_0x7E_NULL_IP_nt!KiStartSystemThread+16
Followup: MachineOwner
---------
↧
Windows 7 with Compusec
Hi,
when we make boot configuration (via O\GPO) changes on Windows 7 computers that has Compusec enabled. These computers refuse to startup after the received the boot configuration changes.
How can we push out a boot configuration changes via a gpo startup script to compusec computers?
For computer that does not start up, is there another workaround besides than rebuild?
Thank you
↧
↧
check disk runs every time at start up
hi All,
hope someone can help. checkdisk runs every time at start up, even when i let it run 100% is still starts again next time, i have 6 drives in my rig, so i have to sit there and cancel it for each drive - boring. i have a bootable game drive also with
win 10 on it, and that never wants to run check disk, do its just on my main drive where the problem is
↧
Windows 7 without bitlocker
Does Widnows 7 computer changes it registry key or BIOS settings or boot settings when these the two bitcloker cmdlets are run on a computer without bitlocker or tpm enable.
manage-bde -protectors -disable c:
manage-bde -protectors -enable c:
from my understanding, since bitcloker or tpm is not enable on the computer, by executing the cmd to -enable and -disable, nothing should be change on the computer.
is this correct?
thank you
↧
HDD Disk Numbers differ and change from BIOS Port numbers (2)
This was asked before by KlausdB:
"I have 4 x HDDs on SATA AHCI (Intel Controller) in Native Mode and 1 x ESATA on Win 7 Pro X64.
I noted that looking in Admin. Tools\Computer Management\Storage (as an example) the 1st HDD (Port 0 in the AHCI BIOS) is showing as "Disk 2" instead of my expectation of
"Disk 1".
Selecting the Drive's Properties correctly shows the "Location 0 (Channel 0, Target 0, Lun 0)".
I also note that the Disk Number allocation in Windows will change randomly after some reboots/startups - going anywhere from "Disk 1" to "Disk 4". I can force/replicate this
behaviour by removing the ESATA drive.
Is this expected behaviour?
It doesn't appear to create any operating issues at this stage, however, is there a way I can force the Drive to always map to (eg) Device 0 --> Disk 1, Device 1 --> Disk 2,
etc?
Thanks."
This was answered by Nicholas Li:
"As far as I know, how the disk is plugged physically and the order it is displayed are not related. For a simple example, if a drive is plugged to SATA interface 4 and it is the only disk, it will be displayed as Disk 0. If there is no related issue about the disk order, I think we can safely ignore this."
Because the topic was closed I want to ask a new question here:
What happens if one of the 4 HDD drives or 5 has an OS installed on it? I ask because windows always write some boot sectors on the first sectors of the first HDD, so, if my OS HDD although it is in BIOS on SATA 0 in windows it is on SATA 4, is this mean that other HDD drive will take the boot info's so that when I'll replace that drive the windows will no longer boot?
Thank you
"I have 4 x HDDs on SATA AHCI (Intel Controller) in Native Mode and 1 x ESATA on Win 7 Pro X64.
I noted that looking in Admin. Tools\Computer Management\Storage (as an example) the 1st HDD (Port 0 in the AHCI BIOS) is showing as "Disk 2" instead of my expectation of
"Disk 1".
Selecting the Drive's Properties correctly shows the "Location 0 (Channel 0, Target 0, Lun 0)".
I also note that the Disk Number allocation in Windows will change randomly after some reboots/startups - going anywhere from "Disk 1" to "Disk 4". I can force/replicate this
behaviour by removing the ESATA drive.
Is this expected behaviour?
It doesn't appear to create any operating issues at this stage, however, is there a way I can force the Drive to always map to (eg) Device 0 --> Disk 1, Device 1 --> Disk 2,
etc?
Thanks."
This was answered by Nicholas Li:
"As far as I know, how the disk is plugged physically and the order it is displayed are not related. For a simple example, if a drive is plugged to SATA interface 4 and it is the only disk, it will be displayed as Disk 0. If there is no related issue about the disk order, I think we can safely ignore this."
Because the topic was closed I want to ask a new question here:
What happens if one of the 4 HDD drives or 5 has an OS installed on it? I ask because windows always write some boot sectors on the first sectors of the first HDD, so, if my OS HDD although it is in BIOS on SATA 0 in windows it is on SATA 4, is this mean that other HDD drive will take the boot info's so that when I'll replace that drive the windows will no longer boot?
Thank you
↧
External Hard Drive not recognized when trying to restore system image.
I know there are posts about this, and I've tried using their suggestions, but i still can't get the system image restore to see my external hard drive or the image file. when i'm in windows itself, i can see the files, but when i try to restore the image,
neither is being recognized. I don't want to lose what i have on there. is there anything anyone can do?
↧
↧
Can't disable "Windows update hasn't been able to check for new updates for the last 30 days. Go to Windows Update to resolve this issue"
I am looking for a script to disable the annoying Windows Update notification.
For a single PC I can go ahead and turn the message off in the Action Center.
Any help with registry edit?
↧
Windows completely freezes very shortly after startup.
Hello, the past two days my computer has been freezing shortly after login, it works
in all versions of safe mode, but when I try to sfc /scannow it gets stuck at 69% and when I try to system restore it freezes the computer, I have tried a virus scan and nothing showed up. In event viewer, in the minute that the computer freezes it has at
least 15 error 7001's and 10005's for each time the computer froze. I cant even install a new version of windows, it does not work in safe mode and I have nothing besides a thumb drive with windows 7 on, when I try to use the thumb drive it does not show up
in boot menu. Any help is appreciated!
↧
Windows 10 upgrade
My mother just recently tried to upgrade her laptop to windows ten, and now her start menu and various other task bar options are not working. The computer started with windows seven, then she updated to windows 8, but then reset her computer to factory
settings and was back to windows seven. Would that have anything to do with why none of her task bar apps are not working? her search bar doesn't even work?
↧
External hard drive is not being read properly
In device manager the Seagate backup drive is working properly, however, in file explorer it shows up as Drive I on one computer (Windows 7 desktop) and DBR Boot (J) on the windows 10 laptop. I cannot open it or access any files. It seems to have been migrated by Windows. Really need to access the documents on the drive. Here is what was in the log. Can you help?:
Log Name: Microsoft-Windows-Kernel-PnP/Configuration
Source: Microsoft-Windows-Kernel-PnP
Date: 3/29/2016 6:44:29 PM
Event ID: 440
Task Category: None
Level: Information
Keywords:
User: SYSTEM
Computer: kensu
Description:
Device USBSTOR\Disk&Ven_Seagate&Prod_Backup+_Desk&Rev_0503\NA5JPWQ9&0 was migrated.
Source: Microsoft-Windows-Kernel-PnP
Date: 3/29/2016 6:44:29 PM
Event ID: 440
Task Category: None
Level: Information
Keywords:
User: SYSTEM
Computer: kensu
Description:
Device USBSTOR\Disk&Ven_Seagate&Prod_Backup+_Desk&Rev_0503\NA5JPWQ9&0 was migrated.
Last Device Instance Id: USBSTOR\Disk&Ven_Seagate&Prod_Backup+_Desk&Rev_0503\NA5JPWQ9&0
Class Guid: {4d36e967-e325-11ce-bfc1-08002be10318}
Location Path:
Migration Rank: 0x0
Present: false
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Kernel-PnP" Guid="{9C205A39-1250-487D-ABD7-E831C6290539}" />
<EventID>440</EventID>
<Version>0</Version>
<Level>4</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2016-03-29T22:44:29.182484800Z" />
<EventRecordID>552</EventRecordID>
<Correlation />
<Execution ProcessID="4" ThreadID="12948" />
<Channel>Microsoft-Windows-Kernel-PnP/Configuration</Channel>
<Computer>kensu</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="DeviceInstanceId">USBSTOR\Disk&Ven_Seagate&Prod_Backup+_Desk&Rev_0503\NA5JPWQ9&0</Data>
<Data Name="LastDeviceInstanceId">USBSTOR\Disk&Ven_Seagate&Prod_Backup+_Desk&Rev_0503\NA5JPWQ9&0</Data>
<Data Name="ClassGuid">{4D36E967-E325-11CE-BFC1-08002BE10318}</Data>
<Data Name="LocationPath">
</Data>
<Data Name="MigrationRank">0x0</Data>
<Data Name="Present">false</Data>
<Data Name="Status">0x0</Data>
</EventData>
</Event>
Class Guid: {4d36e967-e325-11ce-bfc1-08002be10318}
Location Path:
Migration Rank: 0x0
Present: false
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Kernel-PnP" Guid="{9C205A39-1250-487D-ABD7-E831C6290539}" />
<EventID>440</EventID>
<Version>0</Version>
<Level>4</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2016-03-29T22:44:29.182484800Z" />
<EventRecordID>552</EventRecordID>
<Correlation />
<Execution ProcessID="4" ThreadID="12948" />
<Channel>Microsoft-Windows-Kernel-PnP/Configuration</Channel>
<Computer>kensu</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="DeviceInstanceId">USBSTOR\Disk&Ven_Seagate&Prod_Backup+_Desk&Rev_0503\NA5JPWQ9&0</Data>
<Data Name="LastDeviceInstanceId">USBSTOR\Disk&Ven_Seagate&Prod_Backup+_Desk&Rev_0503\NA5JPWQ9&0</Data>
<Data Name="ClassGuid">{4D36E967-E325-11CE-BFC1-08002BE10318}</Data>
<Data Name="LocationPath">
</Data>
<Data Name="MigrationRank">0x0</Data>
<Data Name="Present">false</Data>
<Data Name="Status">0x0</Data>
</EventData>
</Event>
↧
↧
Windows (7/8/8.1) moves everything to primary monitor after they are powered off.
When using multiple monitors Windows moves all open windows and apps to the primary monitor after they have either gone to sleep or been powered off. I have been looking for 2 months now trying to find a solution. My current setup is running Windows 8.1
with an AMD Radeon R9 285X and the drivers are current. However I just switched from Windows 7 a month ago, and I changed from an NVidia card 3 months ago, all with the same result.
This is getting ridiculous Microsoft. This issue has been reported since 2009 and I have not seen a proper fix yet. Please don't bother telling me to update the drivers, I've done that, with both cards and in both OSs. The only solutions I've read
about involve using questionable hardware measures in order to fix a "feature" Microsoft is imposing on people. With more and more industries moving to multiple monitor setups this seems like a poor decision on Microsoft's part. Somehow, forcing
people to leave their monitors on constantly in order to make them work properly seems a violation of energy star compliance.
The following are just some of the threads that relate to this topic in one way or another, all run my Microsoft and none with a proper fix, only MS saying its a feature, or update the drivers, or some other none helpful answer.
http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/multi-monitor-problem-on-windows-7/ecefb1e5-22c9-4014-a2ad-dbf56570b25c
https://social.technet.microsoft.com/Forums/windows/en-US/8a9b5aa7-fe33-4e6d-b39b-8ac80a21fdc2/disable-monitor-off-detection-how?forum=w7itprogeneral
↧
CMD script "if 08 GTR 1 ( echo Yes ) else ( echo NO )" return "NO"
Hi,
In my working environment, I try to use the follow script to identify yesterday's date. However, I find it raises error when the rundate = YYYYMM08 or YYYYMM09.
May someone help to correct what's wrong?
C:\Calyon\test>if 08 GTR 1 ( echo Yes ) else ( echo NO )
NO
C:\Calyon\test>if 07 GTR 1 ( echo Yes ) else ( echo NO )
Yes
C:\Calyon\test>if 09 GTR 1 ( echo Yes ) else ( echo NO )
NO
C:\Calyon\test>if 06 GTR 1 ( echo Yes ) else ( echo NO )
Yes
=============================================
@echo off
for /F "usebackq tokens=1,2 delims==" %%i in (`wmic os get LocalDateTime /VALUE 2^>NUL`) do if '.%%i.'=='.LocalDateTime.' set ldt=%%j
SET SYSTEMDATE=%ldt:~0,8%
IF "%SYSTEMTIME%" == "" (set SYSTEMTIME=%ldt:~8,2%%ldt:~10,2%%ldt:~12,2%)
IF NOT [%1] == [] (SET RUNDATE=%1) ELSE (SET RUNDATE=%SYSTEMDATE%)
@echo on
call :getYesterdayDate yesterday
ECHO RUNDATE is %RUNDATE% ; D-1 is %yesterday%
exit /b
:getYesterdayDate returnVar
setlocal enableextensions disabledelayedexpansion
SET y=%RUNDATE:~0,4%
SET m=%RUNDATE:~4,2%
SET d=%RUNDATE:~6,2%
if %d% gtr 1 ( set /a "d-=1" ) else (
if %m% equ 1 ( set /a "y-=1" , "m=12" ) else ( set /a "m-=1" )
set /a "d=30+((m+m/8) %% 2)"
if %m% equ 3 set /a "d=d - 2 + (3 - y %% 4)/3 - (99 - y %% 100)/99 + (399 - y %% 400)/399"
)
set "d=0%d%" & set "m=0%m%"
endlocal & set "%~1=%y%%m:~-2%%d:~-2%" & exit /b
================================================
↧
BitLocker Windows 7 computers
Hi,
Is there a way to Disable Startup Repair to all BitLocker Enabled Windows 7 computers without having BitLocker asking for Recovery Password upon restart and detect there is change on the BIOS?
Cheers
↧
Method to upgrade the Drivers
Hi Experts,
In our environment, we are facing a scenario where we have to upgrade the user's laptops or desktops drivers. Downloading the drivers and importing them into TS and re-imaging it through SCCM is what done till now. Is there any other better solution to check and upgrade the drivers without re-imaging everytime?
Thanks,
Parameswaran.
Parameswaran.
↧
↧
Window live mail error
When ever I open Windows live mail I get this message:
There was an error when attempting to connect to the Windows Live Calendar service. If the error persists, check to see if there's an upgrade of Windows Live Mail available or contact a service representative.
How do I correct it?
↧
failure loading the trainer . your tempfolder must allow execution .
guy pls help me this issue . this is a hack from some game . when i still not yet format my pc . i open this never facing this issue . but after format . i tried closed all my anti virus , firewall .. but still same .. cant open . can pls help me thx. my
one is win8
↧
IME does not work for programs run as a different user (Windows 7 x64
Running programs under a different user context ("run as") it is not possible to change the input locale for that specific program.
This means that as long as such a program has the focus the language bar AKA IME is turned off or at least becomes invisible and inaccessible for both: mouse and keyboard shortcut ALT-Shift. Giving the focus back to a program, which runs under the current user context, IME is turned on again.
I tried this under Japanese and under a German language version of Windows 7 (x64, Home & Ultimate) with the same result. Is there any way around this problem or is this just a bug? If the latter is the case, is there any way to report this problem to Microsoft or do I just have to wait until someone at Microsoft stumbles across this problem?
Can anyone here confirm this problem?
↧