I bought a IDE to USB 2.5" drive enclosure. I installed the hard drive from my laptop to backup the files as both the LCD backlight and the power switch went south. The green power light comes on. I’ve tried several USB ports but the drive is not seen by Windows 7.
The drive is a Fujitsu MHU2100AT. Why isn’t the drive recognized?
The specs per Gateway are:
Feature | Description |
Manufacturer | Fujitsu |
Model | MHU2100AT |
General | |
Capacity (GB) | 100 |
Total user sectors | 195,371,568 |
Disks | 2 |
Data heads | 4 |
Buffer size (KB) | 8,192 |
Interface | ATA-6 |
Sector size (bytes) | 512 |
Data transfer rate( internal ) | Maximum 45.5 MB/s |
Performance | |
Positioning time (ms) |
|
Rotational speed (rpm) | 4,200 rpm |
Latency (average ms) | 7.14 ms |
Start Time ( typical ) | 3.5 sec. |
Reliability | |
Seek error rate (non-recoverable) | <1 per 106 seeks |
Load/unload cycle | 300,000 |
Power | |
Requirement | + 5 VDC ± 5% |
Spinup (maximum) | 0.9 A |
Read (average) | 2.0 W |
Write (average) | 2.1 W |
Seek (average) | 2.3 W |
Idle | 0.65 W |
Standby (average) | 0.25 W |
Sleep | 0.1 W |
Environmental | |
Ambient temperature | 5° C to 55° C (ambient) /5° C to 55° C (operating) |
Relative humidity (non-condensing) | 8% to 90% RH (operating) |
Maximum Wet Bulb | 29° C (operating) 40° C (non-operating) |
Shock | Operating 2,205m/s2 2ms (225G 2ms) |
Vibration (sine wave) | Operating 9.8m/s2 (1.0 G) / 5 to 500 Hz |
Altitude | -300 to 3,000 m |
Physical | |
Height (mm) | 9.5 |
Width (mm) | 70 |
Depth (mm) | 100 |
Weight (grams) | 99 |
Für Elise - Support the Heart & Breast Cancer Foundations.